TView

class TView : public TObject

    protected:

      void ResetView(Float_t longitude, Float_t latitude, Float_t psi, Int_t& irep)

    public:

                TView TView()
                TView TView(Int_t system)
                TView TView(Float_t* rmin, Float_t* rmax, Int_t system = 1)
                TView TView(TView&)
         virtual void ~TView()
         virtual void AxisVertex(Float_t ang, Float_t* av, Int_t& ix1, Int_t& ix2, Int_t& iy1, Int_t& iy2, Int_t& iz1, Int_t& iz2)
              TClass* Class()
         virtual void DefineViewDirection(Float_t* s, Float_t* c, Double_t cosphi, Double_t sinphi, Double_t costhe, Double_t sinthe, Double_t cospsi, Double_t sinpsi, Float_t* tnorm, Float_t* tback)
         virtual void ExecuteEvent(Int_t event, Int_t px, Int_t py)
         virtual void ExecuteRotateView(Int_t event, Int_t px, Int_t py)
         virtual void FindNormal(Float_t x, Float_t y, Float_t z, Float_t& zn)
         virtual void FindPhiSectors(Int_t iopt, Int_t& kphi, Float_t* aphi, Int_t& iphi1, Int_t& iphi2)
         virtual void FindScope(Float_t* scale, Float_t* center, Int_t& irep)
         virtual void FindThetaSectors(Int_t iopt, Float_t phi, Int_t& kth, Float_t* ath, Int_t& ith1, Int_t& ith2)
               Bool_t GetAutoRange()
        virtual Int_t GetDistancetoAxis(Int_t axis, Int_t px, Int_t py, Float_t& ratio)
              Float_t GetLatitude()
              Float_t GetLongitude()
      TSeqCollection* GetOutline()
              Float_t GetPsi()
         virtual void GetRange(Float_t* min, Float_t* max)
             Float_t* GetRmax()
             Float_t* GetRmin()
                Int_t GetSystem()
             Float_t* GetTN()
             Float_t* GetTnorm()
      virtual TClass* IsA()
         virtual void NormalWCtoNDC(Float_t* pw, Float_t* pn)
         virtual void PadRange(Float_t rback)
         virtual void SetAutoRange(Bool_t autorange = kTRUE)
         virtual void SetAxisNDC(Float_t* x1, Float_t* x2, Float_t* y1, Float_t* y2, Float_t* z1, Float_t* z2)
                 void SetLatitude(Float_t latitude)
                 void SetLongitude(Float_t longitude)
         virtual void SetOutlineToCube()
                 void SetPsi(Float_t psi)
         virtual void SetRange(Float_t* min, Float_t* max)
         virtual void SetRange(Float_t x0, Float_t y0, Float_t z0, Float_t x1, Float_t y1, Float_t z1, Int_t flag = 0)
         virtual void SetSystem(Int_t system)
         virtual void SetView(Float_t longitude, Float_t latitude, Float_t psi, Int_t& irep)
         virtual void ShowMembers(TMemberInspector& insp, char* parent)
         virtual void Streamer(TBuffer& b)
         virtual void WCtoNDC(Float_t* pw, Float_t* pn)

  Data Members

    protected:

                Int_t fSystem          Coordinate system
              Float_t fLatitude        View angle latitude
              Float_t fLongitude       View angle longitude
              Float_t fPsi             View angle psi
              Float_t fTN[12]          
              Float_t fTB[12]          
              Float_t fRmax[3]         Upper limits of object
              Float_t fRmin[3]         Lower limits of object
              Float_t fTnorm[12]       Transformation matrix
              Float_t fTback[12]       Back transformation matrix
              Float_t fX1[3]           First coordinate of X axis
              Float_t fX2[3]           Second coordinate of X axis
              Float_t fY1[3]           First coordinate of Y axis
              Float_t fY2[3]           Second coordinate of Y axis
              Float_t fZ1[3]           First coordinate of Z axis
              Float_t fZ2[3]           Second coordinate of Z axis
      TSeqCollection* fOutline         Collection of outline's objects
               Bool_t fDefaultOutline  Set to TRUE if outline is default cube
               Bool_t fAutoRange       Set to TRUE if range computed automatically

Class Description

*-*-*-*-*-*-*-*-*-*-*-*-*The V I E W class*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
*-*                      =================                              *
*-*                                                                     *
*-*   This package was originally written by Evgueni Tcherniaev         *
*-*   from IHEP/Protvino.                                               *
*-*                                                                     *
*-*   The original Fortran implementation was adapted to HIGZ/PAW       *
*-*   by Olivier Couet and  Evgueni Tcherniaev.                         *
*-*                                                                     *
*-*   This View class is a subset of the original system                *
*-*   It has been converted to a C++ class  by Rene Brun                *
*-*                                                                     *
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*

*-*-*-*-*-*-*-*-*-*-*-*-*-*View default constructor*-*-*-*-*-*-*-*-*-*-*-*-*
*-*                        ========================

*-*-*-*-*-*-*-*-*-*-*-*-*-*View default destructor*-*-*-*-*-*-*-*-*-*-*-*-*
*-*                        =======================

*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*View constructor*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
*-*                            ================
*-*    Creates a 3-D view in the current pad
*-*    By default pad range in 3-D view is (-1,-1,1,1), so ...
*-*
*-*    Before drawing a 3-D object in a pad, a 3-D view must be created.
*-*    Note that a view is automatically created when drawing legos or surfaces.
*-*
*-*   The coordinate system is selected via system:
*-*    system = 1  Cartesian
*-*    system = 2  Polar
*-*    system = 3  Cylindrical
*-*    system = 4  Spherical
*-*    system = 5  PseudoRapidity/Phi
*-*
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*

*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*View constructor*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
*-*                            ================
*-*    Creates a 3-D view in the current pad
*-*  rmin[3], rmax[3] are the limits of the object depending on
*-*  the selected coordinate system
*-*
*-*   Before drawing a 3-D object in a pad, a 3-D view must be created.
*-*   Note that a view is automatically created when drawing legos or surfaces.
*-*
*-*   The coordinate system is selected via system:
*-*    system = 1  Cartesian
*-*    system = 2  Polar
*-*    system = 3  Cylindrical
*-*    system = 4  Spherical
*-*    system = 5  PseudoRapidity/Phi
*-*
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*

*-*-*-*-*-*-*-*-*-*-*-*-*Define axis  vertices*-*-*-*-*-*-*-*-*-*-*-*-*-*
*-*                      =====================                          *
*-*                                                                     *
*-*    Input  ANG     - angle between X and Y axis                      *
*-*                                                                     *
*-*    Output: AV(3,8) - axis vertixes                                  *
*-*            IX1     - 1st point of X-axis                            *
*-*            IX2     - 2nd point of X-axis                            *
*-*            IY1     - 1st point of Y-axis                            *
*-*            IY2     - 2nd point of Y-axis                            *
*-*            IZ1     - 1st point of Z-axis                            *
*-*            IZ2     - 2nd point of Z-axis                            *
*-*                                                                     *
*-*                 8                        6                          *
*-*                /                       /|                         *
*-*             5 /    7                5 / |  7                      *
*-*              |   /|                  |  |  |                       *
*-*  THETA < 90  | 6/ |     THETA > 90   | /2 |                       *
*-*  (Top view)  |  |  |   (Bottom view)  |/   |                       *
*-*             1  | /3                 1    /3                       *
*-*                |/                       /                         *
*-*                 2                        4                          *
*-*                                                                     *
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*

*-*-*-*-*-*-*-*-*Define view direction (in spherical coordinates)-*-*-*-*
*-*              ================================================       *
*-*                                                                     *
*-*              Compute transformation matrix from world coordinates   *
*-*              to normalised coordinates (-1 to +1)                   *
*-*                                                                     *
*-*    Input: S(3)    - scale factors                                   *
*-*           C(3)    - centre of scope                                 *
*-*           COSPHI  - longitude COS                                   *
*-*           SINPHI  - longitude SIN                                   *
*-*           COSTHE  - latitude COS (angle between +Z and view direc.) *
*-*           SINTHE  - latitude SIN                                    *
*-*           COSPSI  - screen plane rotation angle COS                 *
*-*           SINPSI  - screen plane rotation angle SIN                 *
*-*                                                                     *
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*

*-*-*-*-*-*-*-*-*Execute action corresponding to one event*-*-*-*-*-*-*-*-*

*-*-*-*-*-*-*-*-*Execute action corresponding to one event*-*-*-*-*-*-*-*-*-*
*-*              =========================================                    *
*-*  This member function is called when a object is clicked with the locator *
*-*                                                                           *
*-*  If Left button clicked in the object area, while the button is kept down *
*-*  the cube representing the surrounding frame for the corresponding        *
*-*  new latitude and longitude position is drawn.                                         *
*-*                                                                           *
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*

*-*-*-*-*-*-*Find Z component of NORMAL in normalized coordinates-*-*-*-*
*-*          ====================================================       *
*-*                                                                     *
*-*    Input: X - X-component of NORMAL                                 *
*-*           Y - Y-component of NORMAL                                 *
*-*           Z - Z-component of NORMAL                                 *
*-*                                                                     *
*-*    Output: ZN - Z-component of NORMAL in normalized coordinates     *
*-*                                                                     *
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*

*-*-*-*-*-*-*-*-*-*-*-*-*Find critical PHI sectors*-*-*-*-*-*-*-*-*-*-*-*
*-*                      =========================                      *
*-*                                                                     *
*-*    Input: IOPT    - options: 1 - from BACK to FRONT 'BF'            *
*-*                              2 - from FRONT to BACK 'FB'            *
*-*           KPHI    - number of phi sectors                           *
*-*           APHI(*) - PHI separatrices                                *
*-*                                                                     *
*-*    Output: IPHI1  - initial sector                                  *
*-*            IPHI2  - final sector                                    *
*-*                                                                     *
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*

*-*-*-*-*-*-*-Find critical THETA sectors for given PHI sector*-*-*-*-*-*
*-*           ================================================          *
*-*                                                                     *
*-*    Input: IOPT        - options: 1 - from BACK to FRONT 'BF'        *
*-*                                  2 - from FRONT to BACK 'FB'        *
*-*           PHI         - PHI sector                                  *
*-*           KTH         - number of THETA sectors                     *
*-*           ATH(*)      - THETA separatrices                          *
*-*                                                                     *
*-*    Output: ITH1  - initial sector                                   *
*-*            ITH2  - final sector                                     *
*-*                                                                     *
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*

*-*-*-*-*-*-*-*Find centre of a MIN-MAX scope and scale factors-*-*-*-*-*
*-*            ================================================         *
*-*                                                                     *
*-*    Output: SCALE(3)  - scale factors                                *
*-*            CENTER(3) - centre                                       *
*-*            IREP      - reply (-1 if error in min-max)               *
*-*                                                                     *
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*

*-*-*-*-*-*-*-*-*-*-*-*-*Return distance to axis from point px,py*-*-*-*
*-*                      ========================================
*-*
*-*
*-*  Algorithm:
*-*
*-*    A(x1,y1)         P                             B(x2,y2)
*-*    ------------------------------------------------
*-*                     I
*-*                     I
*-*                     I
*-*                     I
*-*                    M(x,y)
*-*
*-*  Let us call  a = distance AM     A=a**2
*-*               b = distance BM     B=b**2
*-*               c = distance AB     C=c**2
*-*               d = distance PM     D=d**2
*-*               u = distance AP     U=u**2
*-*               v = distance BP     V=v**2     c = u + v
*-*
*-*  D = A - U
*-*  D = B - V  = B -(c-u)**2
*-*     ==> u = (A -B +C)/2c
*-*
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*

*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*Get Range function-*-*-*-*-*-*-*-*-*-*-*-*-*
*-*                            ==================
*-*

*-*-*Transfer vector of NORMAL from word to normalized coodinates-*-*-*-*
*-*  ============================================================
*-*
*-*    Input: PW(3) - vector of NORMAL in word coordinate system
*-*           PN(3) - vector of NORMAL in normalized coordinate system
*-*
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*

*-*-*-*-*Set the correct window size for lego and surface plots*-*-*-*-*
*-*      ======================================================
*-*
*-*  Set the correct window size for lego and surface plots.
*-*  And draw the background if necessary.
*-*
*-*    Input parameters:
*-*
*-*   RBACK : Background colour
*-*
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*

*-*-*-*-*-*-*-*-*-*-*-*-*Store axis coordinates in the NDC system*-*-*-*
*-*                      ========================================
*-*

*-*-*-*-*-*-*This is a function which creates default outline*-*-*-*-*-*
*-*          ================================================          *
*-*                                                                    *
*-*      x = fRmin[0]        X = fRmax[0]                              *
*-*      y = fRmin[1]        Y = fRmax[1]                              *
*-*      z = fRmin[2]        Z = fRmax[2]                              *
*-*                                                                    *
*-*                                                                    *
*-*            (x,Y,Z) +---------+ (X,Y,Z)                             *
*-*                   /         /|                                     *
*-*                  /         / |                                     *
*-*                 /         /  |                                     *
*-*        (x,y,Z) +---------+   |                                     *
*-*                |         |   + (X,Y,z)                             *
*-*                |         |  /                                      *
*-*                |         | /                                       *
*-*                |         |/                                        *
*-*                +---------+                                         *
*-*             (x,y,z)   (X,y,z)                                      *
*-*                                                                    *
*-*                                                                    *
*-*                                                                    *
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-**

*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*Set Range function-*-*-*-*-*-*-*-*-*-*-*-*-*
*-*                            ==================
*-*

*-*-*-*-*-*-*-*-*-*-*-*Set 3-D View range*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
*-*                    ==================
*-*
*-* Input:  x0, y0, z0 are minimum coordinates
*-*         x1, y1, z1 are maximum coordinates
*-*
*-*         flag values are: 0 (set always) <- default
*-*                          1 (shrink view)
*-*                          2 (expand view)
*-*

*-*-*-*-*-*-*-*-*Set view direction (in spherical coordinates)*-*-*-*-*-*
*-*              =============================================          *
*-*                                                                     *
*-*    Input  PHI     - longitude                                       *
*-*           THETA   - latitude (angle between +Z and view direction)  *
*-*           PSI     - rotation in screen plane                        *
*-*                                                                     *
*-*    Output: IREP   - reply (-1 if error in min-max)                  *
*-*                                                                     *
*-*    Errors: error in min-max scope                                   *
*-*                                                                     *
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*

*-*-*-*-*-*-*Transfer point from world to normalized coordinates*-*-*-*-*
*-*          ===================================================        *
*-*                                                                     *
*-*    Input: PW(3) - point in world coordinate system                  *
*-*           PN(3) - point in normalized coordinate system             *
*-*                                                                     *
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*

Inline Functions

                 Bool_t GetAutoRange()
                Float_t GetLatitude()
                Float_t GetLongitude()
                Float_t GetPsi()
               Float_t* GetRmax()
               Float_t* GetRmin()
        TSeqCollection* GetOutline()
               Float_t* GetTN()
               Float_t* GetTnorm()
                  Int_t GetSystem()
                   void SetAutoRange(Bool_t autorange = kTRUE)
                   void SetLatitude(Float_t latitude)
                   void SetLongitude(Float_t longitude)
                   void SetPsi(Float_t psi)
                   void SetSystem(Int_t system)
                TClass* Class()
                TClass* IsA()
                   void ShowMembers(TMemberInspector& insp, char* parent)
                   void Streamer(TBuffer& b)
                  TView TView(TView&)