I have installed ROOT/CINT on IRIX64. I did it with mode -32
which compatible with SGI IRIX 5.3 machine :
short = 2 bytes
int = 4 bytes
long = 4 bytes
float = 4 bytes
double = 8 bytes
pointer = 4 bytes
But default mode there is -n32 and CERNLIB compiled with this mode.
These modes (-32 and -n32) are incompatible one with other. As a result
you can not link CERNLIB with ROOT.
I tryed to install ROOT/CINT with -n32 mode.
Compilation and link OK. But when I run CINT
cint> printf("ASDF")
Error: printf param[0]=0 must not be 0 FILE:/var/tmp/aaaa004vV LINE:1
*** Interpreter error recovered ***
cint>
This happens not only with printf but with any function.
So for CINT is something different on IRIX64. What it coud be?
Sizes of all types are the same for -32 and -n32.
Thank you in advance.
Cheers Victor
--
-------------------------------------------------------------------------
Victor M. Perevoztchikov perev@mail.phy.ornl.gov [ US
perev@bnl.gov [ US
perev@vxcern.cern.ch [ CH
perev_at_mx.ihep.su [ RUS
Brookhaven National Laboratory MS 510C PO Box 5000 Upton NY 11973-5000
Phone: 516-344-7107
FAX: 516-344-3253
Oak Ridge National Laboratory, MS 6374, Oak Ridge, TN 37831 (423-574 5928)
Fax (423-576 5780)
University of Tennessee, Knoxville, TN 37996-1200 (secre-at 423-974 3342)